Hirschmann BAT 11b, Руководство по управлению

Страница: 74 / 128

Configuration: Wireless Interface
74
BAT 11b
Release 1.0 03/04
quickly. Consequently, the probability of a collision or
interference during the transmission decreases.
• Medium Distribution
If Medium Distribution is activated, the values AP Distance,
Microwave Robustness, and RTS Threshold are transmitted along
with the beacons of the access point. Per default, Medium
Distribution is activated. This feature is supported by all
Hirschmann 11 Mbps products and by Agere cards .
• Powersave Multicast Buffering
If you are using clients with activated power-saving mode, check
this box. Multicasts are then buffered and sent in dependence on
the SDTIM interval.
• Repeating
Permits direct communication between wireless clients logged
on to the same BAT 11b. If the repeating is deactivated, the
wireless clients logged on to this BAT 11b will not be able to
exchange data among each other. This feature can be used to
achieve a higher degree of security if no client of the wireless cell
is to have direct contact to other clients in the same wireless cell.
• Radio on
This feature makes it possible to disable the wireless cell of the
BAT 11b deliberately. It can still be addressed via the Ethernet
interface.
• Enable Configuration Over WLAN
The configuration of the BAT 11b over the WLAN interface can be
disabled, for instance in order to increase security against
misuse. In this case, communication and, consequently,
configuration via web browser and BAT Discovery are only
possible over cable.