HiRO H50188 WLAN ADSL2+ Router Configuration
Before configuring, pls make sure phone cord is connected to DSL modem at Line jack, DSL modem Power on, connect PC with
enclosed ethernet cable to any of the port in the back and make sure the correspond port LED is blinking.
1. Please insert the supplied CD into your CD-ROM drive.
2. The CD should auto-start, displaying the window shown in below. If your CD does not start automatically, go to Windows
Explorer, Select your CD drive and double click “autorun.exe”.
3. To configure the device, please click “Easy Configuration”.
4. Enter the VPI, VCI, Username and Password your ISP (Internet Services Provider) provided, and Protocol mode. Then press
“Next”.
1 of 8
