HT8 EX DRUM FLOOR SANDER
INSTRUCTIONS FOR FITTING & ADJUSTING THE ABRASIVE GUIDES
MAY 2010
PART # 000560-0
PRINTED
IN
THE
UK
© Hiretech
ABC
From Serial Number
07294 (220/240 Volt) & 03415 (110/120 Volt)
Страница 1: ...HT8 EX DRUM FLOOR SANDER INSTRUCTIONS FOR FITTING ADJUSTING THE ABRASIVE GUIDES MAY 2010 PART 000560 0 PRINTED IN THE UK Hiretech ABC From Serial Number 07294 220 240 Volt 03415 110 120 Volt ...
Страница 2: ...hiretech biz products ht8_ex_drum _service html 3 Check the condition of the Abrasive Guides Ref 142 It is very important that the Abrasive Guides are maintained in good condition The Abrasive Guides ensure that the abrasive belt runs evenly and centred on the sanding drum Worn Abrasive Guides will cause wear to the drum rubber result in poor sanding performance and cause damage to the machine and...
