HIPower HW400A, Руководство по обслуживанию

Страница: 13 / 40

Front Door Inside
Thyristor
Feature: Control A
side welding current
combined with
rectifier and rectify
AC to DC.
Thyristor
Feature: Control B
side welding current
combined with
rectifier and rectify
AC to DC.
Rectifier
Feature: Rectify A side
welding current combined
with thyristor, rectified AC
to DC Rectifier
Feature: Rectify B side
welding current combined
with thyristor and rectify AC
to DC.
10
This unit is equipped with monitoring functions and the cautioned lamp flashes to indicate defect. Investigate and
correct cause(s) when any of the monitor lamps turns on.
WATER TEMP: when a coolant temperature rises higher than 230°i n Fahrenheit.
CHARGE: when a battery charge is insufficient.
OIL PRESS: when oil pressure is dropped below 7 psi.
PREHEAT:Pre-Heating Lamp is ON when a starter switch is turned to “PREHEAT” position.
OVERHEAT: when temperature of the coolant will reach to 105
℃
. Engine will automatically shut down.