Hioki TS2400, Инструкция по эксплуатации

Страница: 56 / 116

52
Setting the Measuring Instrument
5
Check (

) the checkboxes of the
channels to be used and click and select
each item.
• The power meter data is acquired and
displayed in the numerical data window
(p. 15) and the graph window (p. 16).
• The power meter and LCR meter cannot be
used at the same time. When the channel
checkboxes are checked (

) for the power
meter setting, the LCR setting is automatically
changed to Disuse .
6
Enter a Zo value to be used in the Smith
chart.
7
Select the efficiency input and output.
The CH1 power is displayed as P1 and the CH2
power as P2. Specify the power of the channel
for which the efficiency is to be calculated.
The efficiency is calculated by division of the
power.
8
Click OK .
The information is sent to the power meter and
the settings are applied.
When measurement is started, the measurement
results of the power meter can be checked in
the numerical data window (p. 15) and the
graph window (p. 16).