Hioki SW9001, Инструкция по эксплуатации

Страница: 106 / 170

102
Message Reference
(7) EXT. I/O settings
Set and query EXT. I/O input terminal filter function
Syntax Command
:IO:FILTer:STATe <1/0/ON/OFF>
Query
:IO:FILTer:STATe?
Response <1/0>
1/ON The filter is activated.
0/OFF The filter is deactivated.
Description Sets whether to activate or deactivate the filter function to prevent chattering for the SCAN
of EXT. I/O and SCAN_RESET input terminal.
Example
:IO:FILT:STAT 1
The filter function is activated.
:IO:FILT:STAT?
0
The filter function is deactivated.
Note An execution error occurs during scan operation (command).
Set and query EXT. I/O input terminal filter time
Syntax
Command
:IO:FILTer:TIME <0.05
–
0.50/MIN/MAX/DEF>
Query
:IO:FILTer:TIME?
Response <0.05 to 0.50 (NR2)> [s] (MIN:0.05, MAX: 0.50, DEF: 0.05)
Description Sets the filter time.
Example
:IO:FILT:TIME 0.1
Set the filter time to 0.1 s.
:IO:FILT:TIME?
0.05
The filter time has been set to 0.05 s.
Note An execution error occurs during scan operation (command).
Set and query CLOSE signal pulse width
Syntax Command
:IO:PULSe:TIME <0.001
–
0.100/MIN/MAX/DEF>
Query
:IO:PULSe:TIME?
Response <0.001 to 0.100 (NR2)> [s]
(MIN: 0.001, MAX: 0.100, DEF: 0.005)
Description Sets the pulse width of the EXT. I/O CLOSE signal.
Example
:IO:PULS:TIME 0.001
Set the pulse width of the CLOSE signal to 0.001 s.
:IO:PULS:TIME?
0.005
The pulse width of the CLOSE signal has been set to 0.005 s.
Note An execution error occurs during scan operation (command).
HIOKI SW1001A961-04