Hioki ST5680 Скачать руководство пользователя страница 29

Страница: 29 / 253

Inspecting the Instrument Before Use

Startup check

In order to perform a test safely, inspect the instrument prior to startup.

Interrupting current (withstand voltage test mode)

Prepare a resistor with a resistance less than the resistance value calculated from the

output voltage and the test upper-limit value (interrupting current) set for the withstand

voltage test.*

Set the test upper-limit value.

Connect the High Voltage Test Lead to the prepared resistor.

Starting a test (p. 58)

Check that the fail judgment is displayed. If the fail judgment is not displayed, the instrument

may be damaged. Please contact your authorized Hioki distributor or reseller.

Resistance measurement (insulation resistance test mode)

Prepare a resistor with a value more than the lower limit for the insulation resistance

test and close to the test lower limit.*

Setting the test voltage

Connect the High Voltage Test Lead to the prepared resistor.

Starting a test (p. 58)

Check that the measured resistance value matches the resistance value of the prepared

resistor. If the resistance values do not match, the instrument may be damaged. Please

contact your authorized Hioki distributor or reseller.

*1. A high-voltage resistor with a rated power more than the power calculated from the output

voltage and resistance value is recommended.

Recommended resistor: High-voltage/high-resistance thick film resistor GS series (Koa) or

equivalent

Interlock

Check the interlock function for proper operation before starting a test.
See “Interlock function” (p. 165).

Preparation

HIOKI ST5680A961-00

Содержание ST5680






























































































































































































































































Результаты поиска

Содержание ST5680

Отзывы:

Hioki ST5680, Инструкция по эксплуатации, Страница: 29 / 253

Результаты поиска

Содержание ST5680

Отзывы: