Hioki SS7081-50, Инструкция по эксплуатации

Страница: 64 / 71

61
7 Maintenance and Service
Calibration
The calibration period varies with the conditions and environment of use. It is recommended to determine
a calibration period based on those factors and to have the instrument regularly calibrated by Hioki.
Please contact your Hioki distributor to have your instrument periodically calibrated.
Shipping Precautions
•
To ensure safe handling, when transporting the instrument, please use the original box and packing
materials.
Do not use if the box is damaged or warped, or if the packing materials are in poor condition or
incomplete. Contact your authorized Hioki distributor or reseller.
•
If shipping without using the packing boxes and buffer material from the time of purchase, and the product
is damaged, please note that Hioki cannot be responsible for any repair costs even if still within the
warranty period.
• When packing the instrument, make sure to disconnect the cables from the instrument.
• When transporting, avoid dropping or other excessive impacts.
Cleaning
•
If the instrument becomes dirty, slightly moisten a soft cloth moistened with water or a neutral detergent
and wipe the instrument clean. Wipe the display gently with a soft, dry cloth.
• Clean the vents
periodically to avoid blockage.
7.1 Error Display
If the lamps light up or flashes as shown below, an equipment malfunction has occurred.
Display Meaning
No lamp operation
Main controller operations
error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 1 lit
Main controller control error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 2 lit
CPU ROM error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 3 lit
CPU SRAM error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 4 lit
SRAM error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 5 lit
Adjustment value error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 6 lit
FPGA error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 7 lit
Analog board error
ERROR lamp: Blink
ALERT lamp: All channels lit
RUN C lamp and RUN Positive lamp: Only CH 8 lit
Fan error
HIOKI SS7081C961-00