Hioki SP7001 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 52

Hioki SP7001 Скачать руководство пользователя страница 20

16

Connecting the Signal Probes

2.2 Connecting the Signal Probes

Connect to the Non-Contact CAN Sensor.

Connect the SP9200/SP9250 to the SP7001/SP7002 Non-Contact CAN Sensor’s signal probe

connector.

IMPORTANT

• Leave the Signal Probe connected to prevent deterioration of the Signal Probe and Non-

Contact CAN Sensor's connector’s contacts and to keep out dirt.

• The Signal Probe’s connector incorporates a locking mechanism. Always use the probe with

the connector in the locked state to ensure signals can be properly detected and to prevent

damage to the connector.

• Do not connect both the SP9200 and SP9250 to the same Non-Contact CAN Sensor. Doing

so may increase susceptibility to the effects of noise.

SP7001/SP7002

Non-Contact CAN Sensor

Example: SP9200 Signal Probe

SP7001 or SP7002

Signal Probe connector

SP9200 connector with lock

OK

NO

OK

NO

SP9200

SP9250

SP7001/SP7002

Non-Contact CAN Sensor

Insert until you hear a clicking

sound to lock the connector.

HIOKI SP7001A961-01

«
...
18
19
20
21
22
...
»

Содержание SP7001





















































Отзывы:

Нет отзывов