Hioki RM3542, Инструкция по эксплуатации, Страница: 50 / 218

4.3 Setting the Measurement Integration Time Option
44
The integration time can be optionally set for each range by selecting FAST, MED, or SLOW mea-
surement speed. Integration time can be set in ms or PLC* units.
* PLC = Power Line Cycle, where one PLC is the period of the power line waveform. At 50 Hz, one PLC = 1/50
th
of a sec-
ond, and at 60 Hz, one PLC = 1/60
th
of a second.
PLC setting units are useful where measurements may be affected by power line noise (high- or low-resistance measure-
ments)
*1. Low Power = Low-Power Resistance Measurement (p. 28)
*2. Two measurements are made within the above integration times.
4.3 Setting the Measurement Integration Time
Option
Default Settings
Range
LOW POWER: OFF (p. 28) *1 LOW POWER: ON (p. 28) *1
Integration Time [INT]
OVC
Integration Time [INT]
OVC
FAST MED SLOW FAST MED SLOW
100m

0.5 ms 5.0 ms 1PLC ON
*2
   
1000m

0.3 ms 2.5 ms 1PLC ON
*2
0.5 ms 5.0 ms 1PLC ON
*2
10

0.3 ms 2.5 ms 1PLC
ON
*2
0.5 ms 5.0 ms 1PLC
ON
*2
100

0.3 ms 3.0 ms 1PLC OFF 0.3 ms 2.5 ms 1PLC
ON
*2
1000

0.3 ms 3.0 ms 1PLC OFF 0.3 ms 2.5 ms 1PLC
ON
*2
10k

0.3 ms 3.0 ms 1PLC OFF
   
100k

0.5 ms 3.0 ms 1PLC OFF
   
1000k

1.5 ms 5.0 ms 1PLC OFF
   
10M

2.5 ms 1PLC 1PLC OFF
   
100M

1PLC 2PLC 4PLC OFF
   
1
Open the Basic Settings screen.
2
Open the Measurement Settings Screen.
The Basic Settings screen appears.
The Measurement Settings Screen
appears.
[MEAS SETTINGS]
(The settings for the current mea-
surement range are displayed.) 1
Selection
2