Hioki RM3542, Инструкция по эксплуатации, Страница: 118 / 218

9.5 Communication Methods
112

Standard Event Status Enable Register (SESER)
Setting any bit of the Standard Event Status Enable Register to 1 enables access to the cor-
responding bit of the Standard Event Status Register.
Standard Event Status Register (SESR) and Standard Event Status Enable Register (SESER)

Device-Specific Event Status Registers (ESR0 and ESR1)
This instrument provides two event status registers for controlling events.
Each event register is an 8-bit register.
When any bit in one of these event status registers enabled by its corresponding event status
enable register is set to 1, the following happens:
• For Event Status Register 0, bit 0 (ESB0) of the Status Byte Register is set to 1.
• For Event Status Register 1, bit 1 (ESB1) of the Status Byte Register is set to 1.
Event Status Registers 0 and 1 are cleared in the following situations:
• When a

CLS
command is executed
• When an Event Status Register query ( :ESR0? or :ESR1? ) is executed
• When the instrument is powered on
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
PON URQ CME EXE DDE QYE RQC OPC
& & & & & & & &
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
PON URQ CME EXE DDE QYE RQC OPC
Standard Event Status Register (SESR)
Standard Event Status Enable Register (SESER)
bit 6 bit 5 bit 4
SRQ
MSS
ESB MAV
Logical
sum