Hioki RM3542-50, Инструкция по эксплуатации

Страница: 88 / 234

6.2 Store as soon as Measurement is Stable (Auto-Memory Function)
82
Setting the Number of Values to Store
2
Open the Data Memory Settings screen.
3
Enable or disable the function.
4
Return to the Measurement screen.
The Data Settings screen appears.
[DATA SETTINGS]
1
Selection
2
Selection
1
2
Auto-Memory function is not used (default).
Auto-Memory function is used.
Returns to the setting screen.
Saves setting and return to previous screen.
Discards setting and return to previ-
ous screen.
The confirmation screen appears.
When the function is enabled
1
Open the Auto-Memory Settings screen.
2
Enter the number of values to store.
To abort the setting process, press . Settings are abandoned and the display returns to the pre-
vious screen.
3
Accept the settings and return to the Measurement screen.
Displays the Auto-Memory setting
screen.
COUNT (IN judgment) (Hi/Lo judgment)
Setting range: 1 to 99
To Reset Numerical Values
Deletes entered digits.
This key is enabled only when entering
numerical values.
(Example: 20 values are set to be stored.)