Hioki RM3542-50, Инструкция по эксплуатации

Страница: 140 / 234

9.7 Message Reference
134
Messages specific to the RS-232C or GP-IB interface are denoted by or .
9.7 Message Reference
Message Reference Interpretation
Shows the command description.
Shows the message syntax.
Explains the command data or
response message.
Describes the message.
Shows an example of an actual
command application.
Gives a description (excluding the
HEADER command) for the case
where HEADER is normally ON.
Read/Write the Standard Event Status Enable Register (SESER)
Syntax Command
Query
Response
∗
ESE
<0 to 255 (NR1)>
∗
ESE?
<0 to 255 (NR1)>
Description
Command The SESER mask is set to the numerical value 0 to 255.
The initial value (at power-on) is 0.
Query
∗
The contents of the SESER, as set by the *ESE com-
mand, are returned as an NR1 value (0 to 255).
Example
∗
ESE 36
(Sets bits 5 and 2 of SESER)
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
PON URQ CME EXE DDE QYE RQC OPC
< > : Indicates the contents (character or numeric parameters) of the data
portion of a message.
Character parameters are returned as all capital letters.
Numeric Parameters:
•
NRf Number format may be represented by any of the following: NR1,
NR2 and NR3.
•
NR1 Integer data(e.g.: +12, -23, 34)
•
NR2 Fixed-point data (e.g.: +1.23, -23.45, 3.456)
•
NR3 Floating-point exponential representation data (e.g.: +1.0E-2, -
2.3E+4)
Command, Query
Response
Measurement In-
strument
PC