Hioki RM3542-50, Инструкция по эксплуатации

Страница: 109 / 234

8.3 Internal Circuitry
103
8
Electrical Specifications
Input Signals
Input type Optocoupler-isolated, non-voltage contact inputs (compatible
with current sink output, active-low) (negative logic)
Input ON voltage 1 V or less
Input OFF voltage OPEN or 5 to 30 V
Input asserted (ON) current 3 mA/ch
Maximum applied voltage 30 V
Output Signals
Output type Optocoupler-isolated npn open-collector outputs (current sink,
active-low) (negative logic)
Maximum load voltage 30 V
Maximum output current 50 mA/ch
Residual voltage 1 V (10 mA), 1.5 V (50 mA)
Built-in Isolated
Power Supply +5 V power output
Output voltage 4.5 to 5.0 V
Maximum output current 100 mA
+12 V power output
Output voltage 11.0 to 13.0 V
Maximum output current 20 mA
External power input none
•
The values of the maximum output current of +5 V output power and +12 V output power are
the respective values when they are used independently.
Do not take the load simultaneously from each power supply.