Hioki RM2610, Инструкция по эксплуатации

Страница: 67 / 138

63
Outputting a 2D Potential Distribution File
4.12 Outputting a 2D Potential Distribution File
You can output a 2D potential distribution file of 5×5 potential measurements by enabling [Save 2D
potential] . Data is subject to averaging processing.
The 2D potential distribution file allows you to view the potential gradient that exists when current
flows to the electrode sheet. It can be used when you wish to perform analysis using a method
other than the RM2610 Electrode Resistance Measurement System.
The output file uses a filename derived by adding “vpot_” to the beginning of the filename specified
as the analysis results path.
For more information about the file format, see “2D Potential distribution file format” (p. 86).
1
2
3
4
1
Choose [Settings] .
2
Choose [File] .
3
Choose one of the following settings for [Save 2D potential] :
ON Save 2D potential file output results.
OFF

Do not save 2D potential file output results.
4
Click [Apply] or [OK] to accept the settings. (Clicking [OK] will cause you to return to the
main screen.)
4
Customizing Measurement Conditions