Hioki PW8001-01 Скачать руководство пользователя страница 45

Страница: 45 / 262

Supplying Power to the Instrument

2.4 Supplying Power to the Instrument

DANGER

Use only the specified power cord to provide power to the instrument.

Using a power cord other than those specified could cause a fire, resulting in serious

bodily injury.

CAUTION

Do not use a power supply that generates rectangular wave or pseudo-sine

wave output (such as an uninterruptible power supply and a DC/AC inverter) to

power the instrument.

Doing so could damage the instrument, resulting in bodily injury.

Unplug the power cord from the instrument before connecting measurement

leads and sensors with an object under measurement.

Unplug the power cord while the instrument is not used.

Failure to do so could cause the operator to experience an electric shock.

Before connecting the power cord, verify that the supply voltage you plan to

use falls within the supply voltage range noted on the instrument’s AC inlet.

Supplying a voltage that falls outside the specified range to the instrument could

damage the instrument, causing bodily injury.

NOTICE

Use the same ground for the instrument and the devices being connected.

Failure to do so could damage the instrument and the devices being connected or

cause them to malfunction.

When unplugging the power cord from the outlet or instrument, pull on the

plug (not the cord).

The cable may be broken or the output terminal may be damaged.

Connecting the power cord

Turn off the instrument.

Confirm that the power supply voltage is within the rated range, and then, connect the

power cord to the power inlet.

(100 V AC to 240 V)

Connect the plug of the power cord to the outlet.

Preparing for Measurement

HIOKI PW8001A961-00

Содержание PW8001-01







































































































































































































































































Результаты поиска

Содержание PW8001-01

Отзывы:

Похожие инструкции для PW8001-01

Бренды по названию

Популярные бренды

Hioki PW8001-01, Инструкция по эксплуатации

Результаты поиска

Содержание PW8001-01

Отзывы:

Похожие инструкции для PW8001-01

Бренды по названию

Популярные бренды