Hioki PQ3198, Инструкция по эксплуатации, Страница: 84 / 304

5.2 Changing the Recording Settings
78
Sets the type of measurement data.
See: "Key operation during configuration" (p.77)
Note: If 400 Hz is selected, [All data]
∗
can not be selected.
Recording Items
Setting Contents:( ∗ : Default setting)
All data
∗
Records all the calculation values.
Power and Harmonic Records all calculation values except inter-harmonics.
Power Records all calculation values except harmonics and inter-harmonics.
Recording items Power
Power and
Harmonic
All data Recording items Power
Power and
Harmonic
All data
RMS voltage
refreshed each half-cycle
  
Instantaneous flicker
value
  
RMS current
refreshed each half-cycle
  
Integral power
  
Frequency
200 ms
  
Harmonic voltage
—
 
Frequency wave
  
Harmonic current
—
 
10-sec
frequency
  
Harmonic power
—
 
Voltage RMS
  
Phase difference of
harmonic voltage and
harmonic current
—
 
Current RMS
  
High-order harmonic
voltage phase angle
—
 
Voltage
waveform peak
  
High-order harmonic
current phase angle
—
 
Current
waveform peak
  
Inter-harmonic voltage
— —

Active power
  
Inter-harmonic current
— —

Apparent Power
  
THD Voltage Percentage
  
Reactive Power
  
THD current percentage
  
Power factor/displace-
ment power factor
  
High-order harmonic
voltage component
  
Efficiency
  
Mains signaling voltage
  
Voltage
unbalance factor
  
High-order harmonic
current component
  
Current
unbalance factor
  
K factor
  
Flicker
(
Δ
V10/ Pst, Plt)
  
Detailed trend graphs are always displayed with maximum and minimum values.
HIOKI PQ3198A961-03