manualshive.com logo in svg

Hioki PD3259-50, Инструкция по эксплуатации, Страница: 17 / 86

Поделиться
Скачать
Hioki PD3259-50 Скачать руководство пользователя страница 17

11

Operating Precautions

Handling of the instrument

 DANGER

To prevent an electric shock, do not touch any areas 

beyond the barrier while the instrument is in use.

 CAUTION

To avoid damage to the instrument, do not subject it to 

vibration or mechanical shock during transportation and 

handling. Exercise particular care to avoid subjecting the 

instrument to mechanical shock, for example by dropping.

Turn off the instrument after use.

Handling the voltage sensors

IMPORTANT

If the target to be measured is an insulated cable with dirt or moisture 

on its insulation, the instrument may read lower values than the actual 

voltage. In this case, wipe it clean with a dry cloth before measurement.

Failure to do so may could cause inaccurate measurement, in particular, if 

the measurement is performed with multi-conductor, heavily insulated, or 

dirty cables. 

HIOKI PD3259C961-00

Содержание PD3259-50























































































Отзывы:

Нет отзывов