Hioki MR8904 Скачать руководство пользователя страница 27

Страница: 27 / 72

5.1 Launching and Exiting the Software

Before launching the MR8904 CAN Editor, connect a PC to the Memory HiCorder containing the MR8904

with a USB cable.

See:

"Chapter 3 Connections" (p.11)

Next, launch the MR8904 CAN Editor and configure settings.

The CAN definition data file and condition settings file will be created and sent to the Memory HiCorder

containing the CAN unit.

Select

[Start]

[All Programs]

[HIOKI]

[MR8904 CAN Editor]

on the Windows Start Menu to display the

Launch window, shown below.

Settings

Chapter 5

Although it is possible to create and edit CAN definition data files and condition setting files while

not connected to the Memory HiCorder, you will not be able to send or receive conditions.

5.1

Launching and Exiting the Software

Launching the MR8904 CAN Editor

Menu bar

Toolbar

When using a USB hub or other means to con-
nect multiple Memory HiCorders, you can select
the target instrument from the list box on the right
of the toolbar.

Status bar

The message shown to the right will be displayed if you launch the

MR8904 CAN Editor while the PC is not connected to the Memory

HiCorder or if you execute the

[Search MR8875]

command.

If you click

[OK]

without connecting a Memory HiCorder, the

Launch window will be displayed, but the list box on the right of the toolbar will be blank.

Содержание MR8904









































































Результаты поиска

Содержание MR8904

Отзывы:

Бренды по названию

Популярные бренды

Hioki MR8904, Инструкция по эксплуатации

Результаты поиска

Содержание MR8904

Отзывы:

Бренды по названию

Популярные бренды