Hioki MR8904, Инструкция по эксплуатации

Страница: 16 / 72

3.2 Connecting the Unit to the Measurement Target
12
Before connecting the unit, be sure to read "When Connecting the MR8904 and the Object under Mea-
surement" (p.5). Then connect the MR8904 to the measurement target with a CAN cable.
Required items: Model 9713-01 CAN Cable, Phillips head screwdriver (No.1)
3.2 Connecting the Unit to the Measurement
Target
Example: Connecting the unit with the 9713-01
Wire
color
Pin no.
Receive
signal name
- 1 NC
Green 2 CAN_L
Black 3 CAN_GND
- 4 NC
- 5 NC
- 6 NC
Red 7 CAN_H
- 8 NC
White 9 CAN_V+
- Shield GND
1 2 3 4 5
6 7 8 9
Connector

D-Sub 17LE23090-27

(Manufactured by DDK Ltd.)
Top
Screw
1
2
1
Connect the CAN cable to one of
the MR8904 CAN Unit’s ports.
Take care to orient the connector
properly. Tighten the fixing screw
with a Phillips head screwdriver to
secure the connector to the unit.
2
Attach to the measurement object.