manualshive.com logo in svg

Hioki MR8880-20, Инструкция по эксплуатации

Поделиться
Скачать
Hioki MR8880-20 Скачать руководство пользователя страница 51

2.4  Connecting Printer and Loading Recording Paper (Options)

41

2

Chapter 2  M

eas
ureme

n

t Prep

ar

at

ions

Connect the optional MR9000 Printer Unit to the instrument. Usable recording 
paper: Hioki’s optional 9234 Recording Paper (112 mm wide, 18 m roll)

See:

"Loading the Recording Paper" (p. 42)

Before connecting the printer

Connect the MR9000 Printer Unit to the instrument. When connecting and discon-
necting the printer unit, be sure to turn the power switch OFF.

  

Also, be sure to attach 

the protector when the printer is not connected.

2.4 Connecting Printer and Loading Recording 

Paper (Options)

Before use, be sure to read "About the Printer" (p. 19).

Operating Precaution

• Be sure to secure the printer with the 

screws to prevent it from dropping.

• To prevent damage to the printer cover, 

do not apply force to it while it is open.

The printer cannot be used with alkaline dry cell batteries.

When you want to use the printer, use the Z1002 AC Adapter or Z1000 Bat-
tery Pack.

Connecting the Printer

Required items: Phillips screwdriver

Printer connector

1

2

Connect the printer 
unit.

Connect the printer to 
the connector properly.

Secure the printer 
in place at the 
back of the instru-
ment with the two 
screws.

3

Back of instrument

Use a Phillips screw-
driver to remove the 
two screws securing 
the protector on the 
left side of the instru-
ment, and then 
remove the protector.

Содержание MR8880-20













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды