Hioki MR8827 Скачать руководство пользователя страница 79

Страница: 79 / 436

Start and Stop Measurement

4.3 Start and Stop Measurement

Press the

DISP

key to go to the Waveform screen.

Start measurement.

Press the

START

key to start measurement.

Set the pen to Up/Down.

This setting can be chosen before or during measurement. When the pen is set to Down, the waveform

is being drawn. When the pen is set to Up, the waveform is not drawn. This setting applies to all

channels.

Move the cursor to

[Pen]

to change the setting.

Waveform is not drawn.

Down

Waveform is drawn.

Up/Down operation is also possible

using the

TRIG.SET

key or the

Manual

Trigger

key.

Pen in Down position

Pen is shown in color and waveform is drawn.

Pen in Up position

Pen is shown in white and waveform is not drawn.

Stop measurement

Press the

STOP

key to stop measurement.

Redraw waveforms

When measurement is stopped, waveform data for up to 16,000,000 samples before the current point can

be played back (redrawn) by the pen, similar to using a video recorder, starting from any specified point.

This setting applies to all channels. The playback speed can be specified. (It can also be changed during playback.)

Waveform is only played back on the screen and will not affect the printout data. To print the same

waveforms as shown on the screen, use the hard copy function (p. 118).

Move the cursor to

[Player]

Clear

Clear only waveform display.

(Waveform data will not be cleared.)

Redraw

Redraw measurement data. Measurement

settings can also be changed for redrawing.

First

Move pen to start of waveform.

Last

Move pen to end of waveform.

Play/Stop

Start/stop waveform playback.

Move the cursor to

[Speed]

With the

[Normal]

setting, playback

occurs at the same speed as recording.

Very Fast/ Fast /Normal

(Default setting)/ Slow/Very Slow

Measurement start/stop and pen up/down can be controlled via the external control terminal. (p. 338)

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды