Hioki MR8827, Инструкция по эксплуатации, Страница: 62 / 436

57
Measurement Configuration
3.3.3 Recording Length (Number of Divisions)
Set the length (number of divisions) to record each time data is acquired.
Procedure
Press the
DISP
key to open the Waveform screen.
With the Memory Function
1
Move the cursor to [Shot].
2
Select the type.
Fixed Shot Select from a range of preset values.
User Shot Freely specify any value in 1-division units.
3
Set the recording length. (Fixed Shot)
25, 50, 100, 200, 500, 1,000, 2,000, 5,000, 10,000, 20,000,
50,000, 100,000 div
200,000 div (in 4/8/16 ch mode)
500,000 div (in 4/8 ch mode)
1,000,000 div (in 4 ch mode)
(User Shot)
1 to 160,000 div (in 32 ch mode)
1 to 320,000 div (in 16 ch mode)
1 to 640,000 div (in 8 ch mode)
1 to 1,280,000 div (in 4 ch mode)
With the Recorder Function
1
Move the cursor to [Shot].
2
Select the type.
Fixed Shot Select from a range of preset values.
User Shot Freely specify any value in 1-division units.
3
Set the recording length.
(Fixed Shot)
Cont.
On-Off
When
[On]
is selected, measurement is
carried out while continuously overwriting the
data in memory. Data from the point at which
measurement was stopped back to the maximum
recording length can be saved or printed.
25, 50, 100, 200, 500, 1,000, 2,000, 5,000, 10,000, 20,000,
50,000 div
(User Shot)
1 to 80,000 div
3
Measurement