Hioki MR8827 Скачать руководство пользователя страница 28

Страница: 28 / 436

Basic Key Operations

1.4.2

Use a Mouse to Perform Key Operations

You can use a commercially available USB mouse to perform the same operations as the keys on the

instrument.

• There are a variety of mice available, and not all devices will work with the instrument.

• The instrument's USB ports are designed exclusively for use with mice and USB memory sticks. Do

not connect any other type of device.

• When operating the instrument with the mouse, you may experience temporary delayed operation or

corrupted screen display.

• When using a mouse, do not change the interface on the System screen to anything other than “LAN.”

You may not be able to use the mouse while USB communications are in progress.

• External interference may cause the mouse to malfunction. Keep the mouse and mouse cable as far

away as possible from sources of interference.

To perform operations with a mouse:

Up/Down/Left/Right

Moves the mouse cursor

on the screen

Right click

Displays a menu with a list of

screens.

Screens displayed in gray cannot

be selected.

Left-click

Left-click to select menus and menu

items. When measuring with memory

segmentation, you can change the

displayed block by double-clicking the

left button.

Click the current path shown on the

File screen to move to one level up in

the folder hierarchy.

Center wheel

Changes the selected item.

On the File screen, you

can use the center wheel

to change the selected

file. While measuring with

memory segmentation, you

can use the center wheel to

change the displayed block.

Overview

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды