Hioki MR8740, Инструкция по эксплуатации

Страница: 80 / 424

3.4 Setting Measurement Configuration
68
Set the length (number of divisions) to record each time data is acquired.
3.4.3 Recording Length
(number of divisions)
Procedure
To open the screen: Right-click and select [DISP]
→
Waveform screen
Memory Function case
1
Move the flashing cursor to the [Shot] item, and then left-click.
2
Select the type. Select
3
Set the recording length. Select
(Fixed Shot)
(User Shot)
Can be inputted by the numeric keypad on the STATUS
screen
.
See: "7.1.3 Alphanumeric Input" (p.139)
Fixd Shot Select from a a range of preset values.
User Shot Freely specify any value in 1-division units.
25, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000, 50000, 100000
div
1 to 160000 div
Recorder Function case
1
Move the flashing cursor to the [Shot] item.
2
Select the type. Select
3
Set the recording length. Select
(Fixed Shot)
(User Shot)
Can be inputted by the numeric keypad.
See: "7.1.3 Alphanumeric Input" (p.139)
Fixd Shot Select from a a range of preset values.
User Shot Freely specify any value in 1-division units.
Cont. When [On] is selected, measurement is carried out while
continuously overwriting data in memory.
Data from the point at which measurement was stopped
to the maximum recording length can be saved or print-
ed again.
25, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000, 50000 div
1 to 80,000 div