Hioki MR8740, Инструкция по эксплуатации

Страница: 323 / 424

15.1 LAN Settings and Connection (Before Using FTP/Internet Browser/Command Communications)
311
12
Ch
apter 15
Connection
to a Compute
r
14
15
Setting Items
Authorization User
Name and Password
These are used when you login to the instrument by FTP, or use a PC browser
(with the authorization setting set to on).
When authorization is enabled, login is not possible unless a correct user name
and password are entered. This setting is recommended if you wish to restrict
the users who can access the instrument.
The "Password" item is displayed as "************".
Valid characters: Alphabetic characters and symbols (however, ":" (colon) can-
not be used)
If you want to allow anyone to access, or you wish to login as "anonymous" with
a FTP client, leave the user name and password fields blank.
Interface LAN
Host Name This is a name that identifies the instrument on the network. Assign a host name that
is different from the names of all other devices. This instrument does not support dy-
namic DNS, the name that you set is not registered with a DNS server.
IP Address This is an address that identifies an individual device on a network.
Assign an address that is different from the addresses of all other devices.
Subnet Mask This is a setting used to divide an IP address shown to the network into a network
address and a host address. Use the same subnet mask for all devices in the same
network.
Gateway
IP Address For network connections:
When your PC (or the communicating device) is on another network than this instru-
ment, set this to
[On] and specify the gateway device. When the PC is on the same
network, this is usually set to the same address as the default gateway in the PC
communications settings.