Hioki MR8740, Инструкция по эксплуатации

Страница: 306 / 424

13.2 Setting the Waveform Area
294
To evaluate the waveforms, a evaluation area is required. Two methods are available: one is to load the
already created evaluation area and settings, and the other is to create a new evaluation area.
Requirements for loading waveform evaluation area BMP files
Observe the following requirements when creating waveform evaluation areas on a computer and when load-
ing waveform evaluation areas created on other equipment:
Files that do not satisfy these requirements cannot be loaded properly.
13.2 Setting the Waveform Area
Loading the already created evaluation area
Setting method
Procedure Screen: FILE
1
Click
[FILE]
to call the File screen.
2
Select the media for loading.
3
Use the bar cursor to select the desired file.
4
Select
[Load]
.
5
Select
[Exec]
.
6
When no more changes need be made to the
loaded settings, press the
DISP key to make the
Waveform screen appear, and then press the
START key to initiate measurement.
To change the settings, first change the contents,
then press the
DISP key to make the Waveform
screen appear, and then press the START key to
initiate measurement.
See:
"4.3 Loading Data" (p.97)
item Condition Loading operation
Color
White and black
White pixels are treated as background, and black pixels are
treated as the evaluation area.
Size 501 horizontal pixels
×
626 vertical pixels The file will be used as the evaluation area for the Memory
Function 1 screen.
501 horizontal pixels
×
501 vertical pixels
When using the FFT function, the file will be used as the FFT
evaluation area. When using other functionality, the file will be
used as the memory function XY evaluation area.