manualshive.com logo in svg

Hioki MR8740, Инструкция по эксплуатации

Поделиться
Скачать
Hioki MR8740 Скачать руководство пользователя страница 127

5.5  Miscellaneous Printing Functions

115

6

Chapter 

5  Printing

5

This function prints out function status information and channel setting information in list format. The
list settings are the same as for the List function. (

)

Execute the "Send Print Key" by using Model 9333.

A text document edited on a PC can be printed together with a waveform.

1.

Create a text file using 

[Notepad]

 or another suitable application on the PC.

The maximum size of the text comment that can be imported to the MR8847 is 104 x 200.
Print width will be adjusted to the widest line.

2.

Press the 

SYSTEM

 key and set 

[Text Comment]

 on the 

[Printer]

 sheet.

Select

3.

Press the 

FILE

 key and use the File screen to import the text file created on the

PC into the MR8847.

See:

"4.3  Loading Data" (

⇒

 p.97)

The text file content will be printed along with the waveform when printing.

Print Example _ Positioning with regard to other print items

5.5.3 List Print

See:

 "Print a list of settings" (

⇒

 p.112

The printed list contains the setting parameters for the acquired waveform data.
The list content will not change even if the settings were changed after the wave-
form data were acquired.

5.5.4 Text Comment Printing

Off

Text comment is not printed. (default setting)

Before
Wave

Text comment is printed before waveform.

After
Wave

Text comment is printed after waveform.

Upper and Lower limit value

Text comment

List

Zero position comment

<Printing before waveform selected>

Numerical calculation results

Text comment

<Printing after waveform selected>

Gauge

Gauge

Содержание MR8740









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды