Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 96 / 392

90
Configuring Module-Specific Settings
To resister the arbitrary waveform using measured data
> [Channel] > [U8793]
1
2
1
Tap the [WAVE] button.
2
Tap the [Entry] button.
The [Entry from Measured] dialog box appears.
3
5
4
6
7
Values will
automatically appear
in the [First data]
and [Samples]
boxes.
3
Tap the [Target channel] button to choose a channel you wish to register.
Built-in unit , Waveform calculation
4
Tap the [Range] box, and then from the list, choose a registration range option.
Whole  , Segment 1 , Segment 2
Values will appear based on the specified range in [First data] and [Samples] . If you wish to register the
measured data partly, specified the range to register by using [Section cursor] .
See “2.2 Specifying the Waveform Range (Section Cursor)” (p. 34).
HIOKI MR6000A966-03