manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 331 / 392

Поделиться
Скачать
Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 331

325

Sending Data to a Computer With the FTP Client Function

14.3 

Sending Data to a Computer With the FTP 

Client Function

The instrument is equipped with the FTP transmission function (FTP client). You can send data to 

the FTP server on the network.

FTP transmission method

Real-time saving data 

transmission

Automatically sends waveform data during measurement.

Configure the real-time saving settings and specify the save destination 

to 

[FTP]

.

Automatic saving data 

transmission

Automatically sends save target data on completion of the measurement, 

according to the automatic saving settings.

Configure the automatic saving settings and specify the save destination 

to 

[FTP]

.

Transmission with the SAVE key

Press the SAVE key automatically sends save target data. With the 

manual save settings, specify the save destination to 

[FTP]

.

 •

The date of a file sent to the computer is set at when the file was sent.

 • Transmission to all FTP servers is not necessarily guaranteed due to differences among servers.

 •

If a file with the same name exists in the destination, the file is overwritten.

Connecting the Instrument to Computers

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Отзывы:

Нет отзывов