Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 20 / 392

14
Configuring the Input Channel Settings
4
Tap the [Range (f.s.)] box, and then choose a measurement range from the list.
The value of the range represents its maximum displayable value (f.s.).
See the following table for the full-scale resolution of each module.
If the input voltage exceeds the measurable range (overrange occurs), change the measurement range to one
with a lower sensitivity.
After changing measurement ranges, check values including level, upper, lower of the trigger, search, and
numerical calculation functions.
Modules Resolution (LSB)
Model 8966 Analog Unit, Model 8971 Current Unit, Model 8972 DC/RMS Unit 2,000
Model 8967 Temp Unit 20,000
Model 8968 High Resolution Unit, Model U8974 High Voltage Unit, Model U8975 4ch
Analog Unit, Model U8977 3CH Current Unit, Model U8978 4CH Analog Unit
32,000
Model U8976 High Speed Analog Unit 1,600
Model U8969 Strain Unit, Model U8979 Charge Unit 25,000
Model 8970 Freq Unit (Power frequency mode) 2,000
Model 8970 Freq Unit (Count mode) 40,000
Model 8970 Freq Unit (Frequency mode, rotation speed mode, duty ratio mode,
pulse width mode)
10,000
Model MR8990 Digital Voltmeter Unit 1,000,000
*: For the Model 8967 Temp Unit, the valid range varies depending on the thermocouples. For more
information about resolution, refer to “Model 8967 Temp Unit” in “5.2 Specifications of the Options” in the
Quick Start Manual.
5
Configure the input coupling, low-pass filter, and probe ratio settings.
Tapping the area that includes [Coupling] allows the setting dialog box to appear.
(1)
(2)
(3)
HIOKI MR6000A966-03