Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 100 / 392

94
Configuring Module-Specific Settings
Editing programs of the U8793 Arbitrary Waveform Generator Unit
You can use the program function to output a waveform generated by piecing up to 128 steps
together.
Setting up the whole program list
This section describes how to load and edit a program list and configure the whole program list.
> [Channel] > [U8793]
2 1
3
4
Displays the looping count, step number, and sweeping
count of the still-in-progress process.
When you have set the whole looping times to infinity, the
instrument will show [∞] as the entire looping count of the
still-in-progress process repeating more than 50,000 times.
1
Tap the [Load] button to load a program list into the instrument.
2
Tap the [Edit] button to edit the program list with the instrument.
See “Editing the program list” (p. 95).
3
Tap the [All Loop] button to enter the number of repetitions the whole program is executed.
If you enter zero, the instrument displays the sign [∞] and continues outputting the signal repeatedly until you
stop the output.
1 to 50000 , ∞ 
4
Tap the [Filter] button to specify a filter frequency commonly used for every step.
OFF  , 50 , 100 , 200 , 500 , 1 k , 2 k , 5 k , 10 k , 20 k , 50 k , 100 k , 200 k , 500 k , 1M [Hz]
HIOKI MR6000A966-03