Hioki LR8431, Инструкция по эксплуатации

Страница: 89 / 204

81
3
5
Chapter 5 W
avef
orm Analysi
s
About the Waveform and Numerical Value Screens
Settings can be changed on the Waveform/Numerical screen.
Waveform

Analysis
Chapter 5
Eject
Allows you to change
the CF card or USB
flash drive while sav-
ing data in real time.
(p. 48)
Analog and pulse

waveforms
Displays acquired
data as waveforms.
Time

Values
Scroll Bar
Shows the range and position
of the displayed waveform.
Viewing the Scroll bar (p. 82)
Information such as measure-
ment start time and trigger
times is displayed below the
scroll bar.
Measurement

Configuration
You can change

these settings (p. 41)
You can switch

between channel

settings and event

search settings.
“Event Search” (p. 88)
Jump Function (p. 83)
Trigger Mark
Indicates a trigger event
You can select from seven screen configurations (p. 18)

Gauges can be displayed for each channel (p. 84)

Numerical values at waveform cursor positions can be
viewed (p. 84)

Numerical calculation results can be displayed (p. 113)

Measurement data can be displayed as waveforms and
numerical values, as numerical values with comments,
or as numerical values only (p. 87).
Move to a setting item
Apply
Open the setting options
for the item to be set.
Select from the listed
options.
1
2
Select the Waveform
Screen.