Hioki LR8431, Инструкция по эксплуатации

Страница: 54 / 204

3.3 Setting Configuration 1 – Recording Settings
46
Measurement data can be automatically saved to a CF card or USB flash drive
while measuring.
The available types and formats of automatically saved data are as follows.
*1.Numerical calculation settings must be made before starting recording (p. 113).
*2.The [CSV (real time)] and [CSV + Calc] settings are not available when the
record
interval is 10ms or 20ms.
Also, when opening a CSV file in a spreadsheet program,
note that the number of rows that can be loaded at one time is limited (p. A7).
Automatic Saving
Saved

Content
Setting
File

Extension
Description
Waveform
data only
Waveform

(realtime)
.MEM
Waveform data is saved to the CF card while re-
cording.
CSV

(realtime)*2
.CSV
Waveform data is saved in CSV text format while
recording. Saved data cannot be reloaded in the
HiLogger.
Calcula-
tion results
only *1
Calc

(post meas.)
.CSV
After recording, calculation results are saved to
the CF card.
When
[Repeat] is enabled ([On]), calculation re-
sults for each recording are included in the record-
ed data file.
Waveform
data and
calcula-
tion results
*1
Wa
Calc .MEM,
.CSV Waveform data is saved while recording, and cal-
culation results are saved when recording finishes.
CSV + Calc*2
.CSV,
.CSV
Waveform is saved in CSV text format while re-
cording, and calculation results are saved when
recording finishes.
Saved data cannot be reloaded in the HiLogger.