Hioki LR8410-20, Инструкция по эксплуатации

Страница: 180 / 364

6.2 Saving Data
168
Press SAVE to immediately save data according to current settings.
File
Name
Sets the save filename.(Up to 8 characters)
Media
Select the priority save destination when [Quick Save] is selected.
Save
Type
Select the type of data to save.
Calculation must be configured before saving numerical calculation results (p. 183).
Format
(When [Waveform] is selected) Select the data format.
Data saved in CSV format cannot be reloaded into the instrument or Logger Utility pro-
gram. Fortunately, data saved in binary format can be later converted to text (CSV) for-
mat with the instrument or Logger Utility.
Span
(When [Waveform] is selected) Select the time span to be saved.
• Before saving a partial waveform, specify the span to be saved (p. 118).
• When a save span is specified for calculation, the results are saved for the
specified span.
When you select [Quick Save] (to save data upon pressing SAVE)
Setting options: (

: default setting)
SD card

Save to the SD memory card first
USB Memory Save to the USB flash drive first
Setting options: (

: default setting)
Waveform

Save waveform data.
Screen Image Save screen image.
Setup File Save setting configuration data.
Calc Results Save numerical calculation results.
Setting options: (

: default setting)
Binary

Select this format to be able to reload the saved data into the
instrument, or so that it can be loaded into the Logger Utility
program.
CSV Select this format to save the data as a text file. This format
is ideal for loading into spreadsheet programs like Excel.
Setting options: (

: default setting)
All

Save all measured waveform data.
A-B Save waveform data between A/B cursors.
Start-A Save waveform data from the start of measurement to cursor A.
Start-B Save waveform data from the start of measurement to cursor B.
A-End Save waveform data from cursor A to the end of measurement.
B-End Save waveform data from cursor B to the end of measurement.