Hioki LR8410-20, Инструкция по эксплуатации

Страница: 170 / 364

5.9 Alarm Output
158
 Alarms can be output at thermocouple burnout, communications

interruption, and low remaining battery life.
1
Select the [Trig & Alm] Screen.
2
Select a [Alarm] .
3
Select the criterion for which you wish to output an alarm and set it to on.
1
2
3
 Set [Alarm at burn out.] to [ON] .
Alarm output will be generated when a burnout is detected, regardless of the
[AND] and [OR] settings for other alarm criteria settings and alarm source set-
tings.
 Set [Alarm at disconnect.] to [ON] .
A warning is output when the instrument is unable to communicate with a mea-
surement unit or wireless logger, regardless of the
[AND] and [OR] settings for
other alarm criteria settings and alarm source settings.
 Set [Alarm at low battery] to [ON].
A warning is output when a measurement unit or wireless logger indicates low
battery strength, regardless of the
[AND] and [OR] settings for other alarm cri-
teria settings and alarm source settings.

Set [Alarm at disconnect.] to [DELAY] .
If the data containing 2000 or more samples is not received from the unit with
[Alarm at disconnect.]
set to
[DELAY]
, the alarm output will be generated.