Hioki LR5092, Инструкция по эксплуатации

Страница: 9 / 148

Safety Information
3
This manual contains information and warnings essential for safe operation of the
instrument and for maintaining it in safe operating condition. Before using it, be
sure to carefully read the following safety precautions.
Markings on the logger have the following meanings.
Markings on the logger have the following meanings.
Safety Information
This logger is designed to comply with IEC 61010 Safety Standards, and
has been thoroughly tested for safety prior to shipment. However, mis-
handling during use could result i n injury or death, as well l a s damage
to the logger. However, using the logger in a way not described in this
manual may negate the provided safety features.
Be certain that you understand the instructions and precautions in the
manual before use. We disclaim any responsibility for accidents or inju-
ries not resulting directly from logger defects.
Safety Symbols
In the manual, the symbol indicates particularly important infor-
mation that the user should read before using the instrument.
The symbol printed on the instrument indicates that the user
should refer to a corresponding topic in the manual (marked with the
symbol) before using the relevant function.
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
Indicates DC (Direct Current).
Symbols for Various Standards
WEEE marking:
This symbol indicates that the electrical and electronic appliance is
put on the EU market after August 13, 2005, and producers of the
Member States are required to display it on the appliance under Arti-
cle 11.2 of Directive 2002/96/EC (WEEE).
This symbol indicates that the product conforms to safety regu-
lations set out by the EC Directive.