Hioki IR3455, Инструкция по эксплуатации, Страница: 78 / 184

3.2 Measuring Insulation Resistance
72
3.2.3 Checking and Deleting Held Data
The following data are held and displayed after insulation
resistance measurement has been completed.
• Insulation resistance (digital value and bar graph)
• Test voltage
• Actual output voltage
• Leakage current
• Elapsed time
• DAR
• PI
Some data may not be displayed. Press the keys shown in
the table below to switch the indication.
To clear the data, press the key for more than one sec-
ond.
Temperature/humidity data will not be cleared.
Checking Held Data
Data indications to be switched Keys used
key
key
Elapsed time

Temperature/humidity
(When the data are held)
key
Insulation
resistance
Leakage
current


DAR 1 min/ 30 s

PI (10/1 min.)
DAR 1 min/15 s


Test voltage
(setting)
Actual output
voltage

The held data are cleared when power is
turned off. To save the data, use the
memory function.

See 5 "Recording Measurement Data (Memory
Function)" (page 105).
Deleting Held Data