Hioki IR3455, Инструкция по эксплуатации

Страница: 141 / 184

6.3 Entering Temperature and Humidity Measured with
External Thermometer and Hygrometer
1
2
3
4
5
6
7
8
9
10
11
付録
索引
135
6.3.2 Clearing Indications of Temperature
and Humidity Stored Data
To turn off the indicator and clear stored tem-
perature and humidity data, follow the procedure below.
Procedure
1.
If a temperature sensor is connected to
the instrument, disconnect the sensor.
2.
Press the key while in the
standby state.
The temperature will blink.
3.
Press the key.
The temperature is indicated as [ - - -
°C
].
4.
Press the key.
The humidity indicator will blink.
5.
Press the key.
The humidity is indicated as [ - - - %RH ]
6.
Press the key.
This procedure only clears the indications on the
screen and does not delete the temperature and
humidity data stored in the memory.

Delete data

See 5.3 "Deleting Recorded Data"
(page 123).