Hioki IM7580, Инструкция по эксплуатации

Страница: 79 / 340

71
Setting Basic Settings of Measurement
4.2.3 Setting the Delay Time from Trigger to Measurement Start
(Trigger Delay)
Set the delay time from when a trigger is input until measurement starts.
Trigger delay: OFF Trigger delay: ON
TRIG
― ― ― ―
EOM
―――
INDEX
― ――― ―
Signal
Measurement Calculation
TRIG
― ― ― ―
EOM
―――
INDEX
― ――― ―
Signal
Trigger delay
Measurement Calculation
Measurement of
sweep point 1
Measurement of
sweep point 2
Measurement of
sweep point 3
Measurement of
the last sweep
point
Measurement complete
External trigger
: Trigger delay
: Point delay
1
3
2
1
Press [SETUP] .
2
Press [SWEEP] tab.
3
Press [DELAY] .
The numeric keypad can be
used for input.
4
5
4
Set the delay time with

/

, or with the numeric
keypad.
(With the numeric keypad, press [SET] .)
Settable range 0 s to 9.99999 s with resolution 10 ms
[C]
• Disables this function.
• The set time is set to 0 s.
5
Press [EXIT] to close the setting screen.
When trigger delay is set, the LED for indicating that measurement is in progress is lit from the time a
trigger is input until the measurement ends.
4
Analyzer Function