Hioki IM7580, Инструкция по эксплуатации

Страница: 52 / 340

44
Judging Measurement Results
*2 The ∆ % value is calculated using the following formula:
∆ % = × 100
| reference value|
measured value - reference value
3.3.1 Setting the Judgment Mode
Judgment results can be checked by acquiring the results of beep sounds, screen display, I/O output, and
communication commands.
1
10
3
2
1
Press [SETUP] .
2
Press [ADVANCED] tab.
3
Press [JUDGE] .
4
5 6
7 8
9
4
Select the judgment mode.
[OFF] Disables comparator and BIN function.
[COMP] Enables comparator judgment. (p. 46)
[BIN] Enables BIN judgment. (p. 53)
5
When a measured value is outside the guaranteed
accuracy range, set how the measured value is
judged.
[DO]
Judges when a measured value is outside
the guaranteed accuracy range.
[NOT]
Outputs error for HI judgment when a
measured value is outside the guaranteed
accuracy range.
6
Sets the beep sounds for judgment results.
[OFF]
No beep sound.
[IN] Beeps if all the judgment results are IN.
[NG]
Beeps if one of the judgment results is LO
or HI.
7
With

/

, set the beep tone.
Settable range 0 to 14