Hioki IM7580, Инструкция по эксплуатации

Страница: 210 / 340

202
External Input/Output Connector and Signals
CONTINUOUS measurement mode
Pin I/O
Signal name
Function Logic
Common COMP
1 IN
TRIG
― ― ― ―
External trigger (p. 203) Pos/
Neg
Edge
2 IN
(Unused) -
- -
3 IN (Unused) - - -
4 IN
(Unused) -
Neg Level
5 IN
(Unused) -
Neg Level
6 IN
(Unused) -
Neg Level
7 IN (Unused) - - -
8 -
ISO_5V
― ―― ― ― ―
Isolated 5 V power output
- -
9 -
ISO_COM
― ―― ― ―――
Isolated power supply common
- -
10 OUT ERR
―――
Outputs when a measurement error, contact error, Hi Z reject error
or detection level error occurs.
Neg Level
11 OUT
PARA1-HI
― ――― ― ― ― ―
Outputs if the comparator judgment result of the first parameter is
HI.
Neg Level
12 OUT
PARA1-LO
― ――― ― ― ― ―
Outputs if the comparator judgment result of the first parameter is
LO.
Neg Level
13 OUT
PARA2-IN
― ――― ― ― ― ―
Output if the comparator judgment result of the second parameter is
IN.
Neg Level
14 OUT AND
―――
AND
―――
Outputs if all panel judgments are IN and the instrument is not
OUT_OF_BINS.
Neg Level
15 OUT
PARA3-IN
― ――― ― ― ― ―
Outputs if the comparator judgment result of the third parameter is
IN.
Neg Level
16 OUT
PARA4-HI
― ――― ― ― ― ―
Outputs if the comparator judgment result of the fourth parameter is
HI.
Neg Level
17 OUT
PARA4-LO
― ――― ― ― ― ―
Outputs if the comparator judgment result of the fourth parameter is
LO.
Neg Level
18 OUT (Unused)
-
- -
19 OUT (Unused) - Neg Level
20 IN C_P0
― ― ― ―
*2 Switches the judgment result output.
- -
21 IN C_P1
― ― ― ―
*2 Switches the judgment result output.
- -
22 IN
(Unused) -
Neg Level
23 IN (Unused) - Neg Level
24 IN
(Unused) -
Neg Level
25 IN
(Unused) -
Neg Level
26 IN
(Unused) -
Neg Level
27 - ISO_COM
― ―― ― ―――
Isolated power supply common - -
28 OUT
EOM
―――
Measurement complete signal
When this signal is output, the comparator judgment results have
been finalized.
Neg Edge
29 OUT
INDEX
― ――― ―
• Signal that indicates measurement (calculations and judgment
have not been processed) has been completed.
• The sample can be switched once this signal changes from HIGH
(OFF) to LOW (ON).
Neg Edge
30 OUT
PARA1-IN
― ――― ― ― ― ―
Outputs if the comparator judgment result of the first parameter is
IN.
Neg Level
31 OUT
PARA2-HI
― ――― ― ― ― ―
Outputs if the comparator judgment result of the second parameter
is HI.
Neg Level