Hioki IM7580, Инструкция по эксплуатации

Страница: 195 / 340

187
Common Functions (LCR Mode, ANALYZER Mode)
7.3.5 Disabling Key Operation (Key-lock Function)
The key-lock function includes the following two types. Select from these as required for the
application.
You can also set a passcode (security code).
FULL key-lock Disables all setting changes.
SET key-lock
Enables the settings for comparator and BIN judgments, but disables
other setting changes.
• The key lock will not be enabled for [TRIG] in the case of an external trigger. (p. 33)
• Turning off the power will not cancel the key-lock function.
• Set and check a passcode in advance to set the key-lock.
Enables the key-lock function
1
2
3
1
Press [SETUP] .
2
Press [COMMON] tab.
(Press [ADVANCED] tab for the ANALYZER mode.)
3
Press [KEYLOCK] .
4 5
6
4
Press [KEYLOCK] .
5
Press [FULL] .
(Press [ON] for ANALYZER mode.)
Only [OFF] and [ON] are displayed for ANALYZER.
[OFF] Key-lock is not set.
[FULL]
[ON]
All setting changes except canceling the key-
lock are disabled to protect the settings.
You can check the measurement conditions with
[INFO].
[SET]
• Setting the comparator and BIN judgments
• Canceling the key-lock
All setting changes except the above are
disabled to protect the settings.
• You can check the measurement conditions
with [INFO] .
• During comparator judgment, [LMT] enables
you to check the limit values.
• During BIN judgment, [LMT] enables you to
check the limit values.
6
Press [EXIT] to close the setting screen.
7
Application Function