Hioki IM7580, Инструкция по эксплуатации

Страница: 109 / 340

101
Setting the Graph Display Method
4.5.4 Setting the X-Y Display Scale Width
This section describes how to set the scaling method when performing auto-scaling by pressing
[SCALE] on the X-Y display.
When rendering a Cole-Cole plot or admittance circle, set the upper and lower limit values while
maintaining the same X- and Y-axis grid sizes.
• This setting is valid only if both of the X- and Y-axis upper and lower limit value settings are set
to [AUTO] .
• If the setting for either axis is [MANUAL] , [INDIVIDUAL] (normal auto-scaling) will be
performed.
1
1
Press [GRAPH

] .
3 2
4
2
Press [XY SCALE] .
3
Select the scaling method.
[INDIVIDUAL]
Sets the X- and Y-axis upper and lower
limit values to individual appropriate
values when auto-scaling is performed.
[SAME]
When auto-scaling is performed, sets the
X- and Y-axis upper and lower limit values
to appropriate values while maintaining
the same grid sizes.
4
Press [EXIT] to close the setting screen.
Examples of screen:
When the value is set to [INDIVIDUAL] When the value is set to [SAME]
4
Analyzer Function