Hioki IM3536 Скачать руководство пользователя страница 147

Страница: 147 / 270

143

Saving Measurement Data

Procedures

Screen display method (For more information, see p. 29.):

(Measurement screen)

FILE

key>(

FILE

screen)

SET

tab

Insert the USB flash drive into the front

USB connector (p. 138).

Touch the

TYPE

key.

Touch the

TEXT

key and then touch

the

EXIT

key.

Set the header, delimiter, and quotation

mark character.

DATE

Sets whether to use the save date

and time as the header (p. 144).

SET

Sets whether to use the measure-

ment condition as the header

(p. 145).

PARA

Sets whether to use the save

measurement parameters as the

header (p. 146).

DELIM

Sets the delimiter type. (p. 148)

QUOTE

Sets the quotation mark character.

(p. 149)

Touch the

EXIT

key.

Displays the measurement screen.

Touch the

SAVE

key.

The measurement data will be saved.

•Touching

SAVE

automatically creates a folder on the USB flash drive and saves the file there.

The date is used for the name of the folder created when you press

SAVE

key.

Example: Saved on September 30, 2014 → 20140930

•

"To specify the save folder" (p. 152)

•

A filename will be assigned automatically based on the date and time.

(Example: Saved at 16:31:44 on September 30, 2014 → 140930163144.csv)

Using USB Flash Drive (Saving and Loading Data)

Содержание IM3536















































































































































































































































































Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды

Hioki IM3536, Инструкция по эксплуатации

Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды