Hioki IM3536 Скачать руководство пользователя страница 139

Страница: 139 / 270

135

Testing the System (Self diagnosis)

ROM/RAM test

Allows you to check the instrument’s internal memory (ROM and RAM) for errors.

Screen display method (For more information, see p. 28.):

(Measurement screen)

SYS

key>(

SYS

screen)

TEST

tab

Touch the

ROM/RAM TEST

key.

Starts the test. (Approx. 40 seconds)

No operation is possible during the ROM/

RAM test.

Never turn off the power during a test.

If the overall judgment result indication is

PASS

, the test ended normally.

If the overall judgment result indication is

the instrument needs to be repaired. Contact

your authorized Hioki distributor or reseller.

Touch the

EXIT

key twice.

Displays the measurement screen.

Testing EXT I/O input/output signals

Allows you to verify that output signals are output normally from EXT I/O and that input signals can

be read properly.

Screen display method (For more information, see p. 28.):

(Measurement screen)

SYS

key>(

SYS

screen)

TEST

tab>

I/O HANDLER TEST

key

(To perform an output signal test)
Touch the button with the name of the

signal for which you want to check the

output.

(To perform an input signal test)
Input a signal and verify that the signal

line name

is displayed in the window.

To perform an output signal test

To perform an input signal test

*: Names of signals that are being input (LO)

Touch the

EXIT

key twice.

Displays the measurement screen.

On the test screen, an input signal does not

cause the trigger to be enabled or panel to

be loaded.

Setting the System

Содержание IM3536















































































































































































































































































Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды

Hioki IM3536, Инструкция по эксплуатации

Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды