Hioki IM3536 Скачать руководство пользователя страница 138

Страница: 138 / 270

134

Testing the System (Self diagnosis)

Panel calibration

Allows you to calibrate the touch panel.

Screen display method (For more information, see p. 28.):

(Measurement screen)

SYS

key>(

SYS

screen)

TEST

tab>

CALIBRATION

key

Touch in the location of

continu-

ously until the green

appears.

Touch the

SET

key to confirm the cali

bration.

Touch when you wish to repeat panel correc-

tion from the beginning.

If the

SET

key does not appear, the instru

ment needs to be repaired.

Contact your authorized Hioki distributor or

reseller.

Touch the

EXIT

key.

Displays the measurement screen.

Testing the screen display status and LED status

Allows you to check the screen display status and LED status.

Screen display method (For more information, see p. 28.):

(Measurement screen)

SYS

key>(

SYS

screen)

TEST

tab>

DISPLAY & LED TEST

key

Touch the screen and check for switch-

ing on and off of screen colors and the

LEDs on the front of the instrument.

The screen and LED status should change

each time you touch the screen.

Front panel LEDs

Screen color

All lit up

Red

All turned off

Green

OUT

lit up

Blue

Front panel LEDs

Screen color

lit up

Black

MEAS

lit up

White

If the entire screen does not appear to be the

same color or if the LEDs do not turn on as

shown in the figure on the left, the instrument

needs to be repaired.

Contact your authorized Hioki distributor or

reseller.

The instrument will return to the

SYS

screen.

Touch the

EXIT

key.

Displays the measurement screen.

Содержание IM3536















































































































































































































































































Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды

Hioki IM3536, Инструкция по эксплуатации

Результаты поиска

Содержание IM3536

Отзывы:

Похожие инструкции для IM3536

Бренды по названию

Популярные бренды