Hioki FT6031-50, Инструкция по эксплуатации

Страница: 32 / 98

26
Inserting/Replacing Batteries
2.2 Inserting/Replacing Batteries
Before using the instrument, insert four AA alkaline batteries (LR6).
Before measurements, check that the battery level is sufficient.
When the battery charge is low, replace the batteries.
WARNING
• To avoid electric shock, turn off the instrument and
disconnect the measurement cables or test leads
before replacing batteries.
• Batteries may explode if mistreated. Do not short-
circuit,disassemble the batteries, or dispose of
them in fire. Do not recharge alkaline batteries.
Handle and dispose of batteries in accordance with
local regulations.
• After inserting the batteries, reattach the cover,
screws, and put on the protector before using the
instrument.
• To prevent instrument damage or an electric shock,
use only the screws that are originally installed for
securing the battery cover in place. If you have lost
any screws or find that any screws are damaged,
please contact your authorized Hioki distributor or
reseller.
HIOKI FT6031B961-00