20
1.4 Names and Functions of Parts
Icons
Description
1
Lights when Auto Range is selected.
2
Lights when measurement data is being stored.
3
Shows displayed axis. (XYZ indicates a resultant RMS value*.)
*
See
1.5 "Definition of Measurement Items" (P.23)
4
Lights when holding a maximum value.
See
3.6 "Holding Maximum Value of the Resultant RMS Values" (P.53)
5
Lights when battery voltage becomes too low. (Replace the batteries when
this icon lights.)
See
"Function for checking low battery voltage" (P.38)
6
Lights during output of waveform.
7
Lights during output of a resultant RMS value.
8
Lights when automatic power off is on.
9
Indicates the number of the measurement data stored in memory.
See
3.7 "Checking and Deleting Saved Measurement Data" (P.54)
10
Indicates that a measurement value is an RMS value.
Flashes during the slow function is on.
11
Indicates the unit used for indicating exposure level.
See
3.4 "Measuring Exposure Level (General Public)" (P.43) ,
3.5 "Measuring Exposure Level (Occup.)" (P.50)
12
• Indicates the unit used for indicating magnetic flux density.
See
3.3 "Measuring Magnetic Flux Density" (P.40)
8
7
6
5
3, 4
1, 2
Magnetic flux density Function
Displays the selected magnetic flux density
mode.
See
3.3 (P. 40)
Exposure level Function
Displays the selected exposure level modes as
follows:General Public
Occup. (Occupational)
See
3.4 (P. 43) ,3.5 (P. 50)
Memory
View Function
Displays saved data.
See
3.7 (P. 54)
9
10
11
12
Display
Note: Icons not described below cannot be used with this tester.
X
2
+Y
2
+Z
2
www.
.com
1.800.561.8187
