8
Connections
Handling
Handling with the CD
Connect only designated devices to the instrument terminals. To pre-
vent damage, do not apply a voltage that is outside the specified range
to the instrument.
• The instrument and the 100 cm
2
and 3 cm
2
Magnetic Field Sensors
are built mainly from nonmagnetic metals and contain hardly any
magnetic materials. Thus if the instrument is heated by an all metal IH
and other induction heating system the sensor may melt or be dam-
aged, because of the nonmagnetic metals.
• The 100 cm
2
and 3 cm
2
Magnetic Field Sensors have a plastic housing
that may melt if brought into contact with a hot measurement object
(cookpot or other hot object).
• Do not expose cables to excessive stress as they may break. Espe-
cially, the 9758 Extension Cable and 9759 Output Cable should be
handled with care.
• Always hold the disc by the edges, so as not to make fingerprints on
the disc or scratch the printing.
• Never touch the recorded side of the disc. Do not place the disc
directly on anything hard.
• Do not wet the disc with volatile alcohol or water, as there is a possi-
bility of the label printing disappearing.
• To write on the disc label surface, use a spirit-based felt pen. Do not
use a ball-point pen or hard-tipped pen, because there is a danger of
scratching the surface and corrupting the data. Do not use adhesive
labels.
• Do not expose the disc directly to the sun's rays, or keep it in condi-
tions of high temperature or humidity, as there is a danger of warping,
with consequent loss of data.
• To remove dirt, dust, or fingerprints from the disc, wipe with a dry
cloth, or use a CD cleaner. Always wipe radially from the inside to the
outside, and do no wipe with circular movements. Never use abra-
sives or solvent cleaners.
• Hioki shall not be held liable for any problems with a computer system
that arises from the use of this CD, or for any problem related to the
purchase of a Hioki product.
www.
.com
1.800.561.8187
